Fostex VM200 manual Effects Parameters, Reverb-type Effects, Early Reflection-type Effects

Effects Parameters

Effects Parameters

The following tables list the parameters of each effect type. The num- bers in parentheses indicate the preset effects that belong to the effect types.

Reverb-type Effects (00–24)

Parameter	Value	Description
REV TIME	0.1–30.0 [s] (0.1 step)	Length of the reverberation.
PRE DLY	0–160 [ms] (1 step)	Delay time from the early reflections until the
		reverb.
DENSITY	0–10, AUTO 1	Density of the reverb.
E/R BAL		Volume balance between the early reflections
	0–100 [%] (1 step)	and the reverb. Only ER with 0%, and only reverb
		with 100%.
ROOM SIZE	0.1–2.0 (0.1 step)	The size of the room (relative to E/R).
E/R FB	0–100 [%] (1 step)	Degree of repeated early reflections
DIFFUSION	0–10 (1 step)	Left/right spread of the reverb effects.
LO RATIO	0.1–2.0 (0.1 step)	Length of the low frequency reverberation,
		expressed as a ratio relative to the REV.TIME.
HI RATIO	0.1–2.0 (0.1 step)	Length of the high frequency reverberation,
		expressed as a ratio relative to REV.TIME.
LPF	1.00kHz–20.2kHz, THRU	Cut-off frequency of the low pass filter.
	(step: same as EQ)
PRESENCE	-10–0–+10 (1 step)2	Brightness in the high range of the reverb.

1.With AUTO, the optimum value for the REV TIME setting will be used.

2.Brightness increases with a positive setting, and decreases with a negative setting.

Early Reflection-type Effects (25–32)

Parameter	Value	Description
ROOM SIZE	0.1–2.0 (0.1 step)	The size of the room (relative to E/R).
INI.DLY	0–200 [ms] (1 step)	Delay time from the dry sound until the early
	TBD	reflections of the reverb are heard.
LIVENESS	0–10 (1 step)1	Adjusts how the reflections decay.
E/R FB	0–100 [%] (1 step)	Degree of repeated early reflections
LO RATIO	0.1–1.0 (0.1 step)	Low frequency amount of the feedback.
HI RATIO	0.1–1.0 (0.1 step)	Low frequency amount of the feedback.
DIFFUSION	0–10 (1 step)	Left/right spread of the reflections.

VM200 User’s Guide 139