Fostex VM200 manual Current Scene Status, Key Mode Section, ROUTING/PHASE Key

Touring the VM200

Current Scene Status

The Current Scene Status section features only one key, which shares its name.

CURRENT SCENE STATUS

When you press the [CURRENT SCENE STATUS] key, the VM200 enters Current Scene Status mode and displays the CURRENT SCENE STATUS function page. The number and name of the scene (e.g., 01:MY_SCENE) appear in the top right of the display.

The CURRENT SCENE STATUS function page enables you to:

•Enable the EQ for channels 1-8, 9-16, or 1-16

•Turn on the ADD. AUX parameter (to enable AUX Sends 3&4)

•Set the Smoothing function to Level 1 or 2

•Set the record buss gain (REC-B.GAIN) from [∞ to -90 to 0dB] (available when ADD. AUX is off)

•Set the sends for AUX1, AUX2, AUX3, and AUX4, EFF1, and EFF2 to Pre-fader or Post-fader

•Pair AUX Sends (Aux1&2 or Aux3&4).

Key Mode Section

The Key Mode section features four function keys: [ROUT- ING/PHASE], [PAIR/GROUP], [CH VIEW], and [CHANNEL/METER], as described below.

KEY MODE

ROUTING/PAIR/

PHASEGROUP

	MMC SEND
		CHANNEL/
CH VIEW			METER

[ROUTING/PHASE] Key

The [ROUTING/PHASE] key displays a sequence of three function pages that let you control mixer routing, assign S/P DIF inputs to channels, and invert the phase for each channel.

The ROUTING function page lets you route input channels 1–20 to the Stereo Buss (ST BUS), the Record Buss (REC BUS), or the ADAT out- put (DIRECT).

Press a Page Select key to specify Channels 1-8, 9-16, or 17-20. Then press the [EQ EDIT], [SOLO], and/or [ON] key for each channel to route the signal to a potential destination. The indicator in the chan- nel/buss matrix highlights (dark square).

24 VM200 User’s Guide