Fostex VM200 manual Monopitch

Effects Parameters

Parameter	Value	Description
LPF	1.00kHz–20.2kHz, THRU	Cut-off frequency of the low pass filter.
	(step: same as EQ)

1. Brightness increases with a positive setting, and decreases with a negative setting.

MONO_PITCH (40)

Parameter	Value	Description
PITCH	-24–0–+24 (1 step)	Amount of pitch shift.
	(+/-2 octave)
ADJUST	-100–0–+100 (1 step)	Fine adjustment to the pitch shift.
	(+/- semitone)
PITCH DLY	0–340 [ms] (1 step)	Delay time of the pitch shift.
PITCH FB	0–100 [%] (1 step)	Feedback amount.
PITCH PAN	L10.0–0.0–R10.0 (0.5	Pan position of the pitch shift.
	step)
PITCH MODE	1, 2, 3, 4 1	Selects the size of the buffer for pitch shift.

1.Select “1” when response speed is priority. Select “2” for a typical setting. Select “3” or “4” for more clarity.

DUAL_PITCH (41)

Parameter	Value	Description
PITCH1/2	-24–0–+24 (1 step)	Amount of pitch shift for PITCH SHIFT 1 or 2.
	(+/-2 octave)
ADJUST1/2	-100–0–+100 (1 step)	Fine adjustment to the pitch shift for PITCH
	(+/- semitone)	SHIFT 1 or 2.
PIT1/2 DLY	0–340 [ms] (1 step)	Delay time of the pitch shift for PITCH SHIFT 1 or
		2.
PIT1/2 FB	0–100 [%] (1 step)	Feedback amount for PITCH SHIFT 1 or 2.
PIT1/2 PAN	L10.0–0.0–R10.0 (0.5	Pan position of PITCH SHIFT 1 or 2.
	step)
PIT1/2 MODE	1, 2, 3, 4 1	Selects the size of the buffer for PITCH SHIFT 1
		or 2.

1.Select “1” when response speed is priority. Select “2” for a typical setting. Select “3” or “4” for more clarity.

VM200 User’s Guide 143