22
ENGLISH
Assigning names to thesources
You can assign names to station frequencies and
CDs. After assigning a name, it will appear on
the display when you select the source.
Sources Maximum number of the
characters
Station frequencies Up to 10 characters (up to
30 station frequencies
including both FM and AM)
CDs * and Up to 32 characters (up to
CD changer *40 discs)
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
space
0123
456789–/<>
Notes:
• When you try to assign a name to the 41st disc,
“NAME FULL” appears on the display. (In this
case, delete unwanted names before assignment.)
• When the CD changer is connected, you can assign
names to CDs in the CD changer. These names can
also be shown on the display if you insert the CDs
in this unit.
* You cannot assign a name to a CD Text.
1
Select a source you want to assign a
name to.
2
Press and hold SEL (select) for more
than 2 seconds while pressing DISP.
When you select the CD as the source:
When you select a station frequency as the
source:
3
Select a character.
About the available characters, see below.
4
Move the cursor to the next (or
previous) character position.
5
Repeat steps 3 and 4 until you finish
inputting the name.
6
Press the button while the last
selected character is flashing.
The input name is stored in memory.

To erase the input characters

Insert spaces using the same procedure
described above.

Available characters

EN17-22.KD-LX100[J]f 1/8/01, 10:23 AM22