ENGLISH
RADIO BASIC OPERATIONS
SSM |
Listening to the radio
You can use either automatic searching or manual
searching to tune into a particular station.
Searching a station automatically: Auto search
1 Select the band.
1Press SOURCE to select
tuner as the source.
2If necessary, press BAND
repeatedly to select the band.
Each time you press the button, the band changes as follows:
FM1
FM2 
FM3 
AM
Selected band appears.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2 Start searching a station.
Press 
¢ to search
stations of higher frequencies.
Press 4 
to search stations of lower frequencies.
To stop searching before a station is received,
press the same button you have pressed for searching.
To tune in FM stations only with strong signals
1 Press MODE.
“MODE” appears on the display, and the number buttons can work as different function buttons.
2Press LOCAL, while “MODE” is still on the display, so that the LOCAL indicator lights up on the display.
This function works only while searching FM stations, including SSM preset (see page 9). Each time you press the button, the LOCAL indicator lights up and goes off alternately.
Searching a station manually: Manual search
1 Select the band.
1 Press SOURCE to select tuner as the source.
2If necessary, press BAND
repeatedly to select the band.
Each time you press the button, the band changes as follows:
FM1
FM2 
FM3 
AM
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
When a station is received, searching stops.
8
