EN
7
Initial set-up
The initial set-up consists of carrying out all the necessary settings to search and store all the channels you can receive in your
area.Make sure that the TV is switched on and follow steps 1 to 6 on this page.
When you first switch the TV on,the language selection menu appears.
If this does not happen,refer to Manual channel set-up section to find out how to carry out an Autosearch.
1Choose the language from the menus with the or button.
2Confirm with OK. A list of countries appears.
3Choose the country with the or button.
This is the country you are in,or the country whose channels you want to receive if you live near
it borders.
4Confirm with OK. A welcoming message appears.
5Start auto installation by pressing OK.
The menu that appears tells you how set-up is progressing.Wait for the end of set-up mes
sage before leaving the menu,otherwise the channels will not all be memor ised.
Depending on the number of programmes available,auto installation can take up to 10 minutes.
Channels are arranged in a pre-set order.To modify this order,name and rename channels
or delete channels stored twice,press OK and go to step 6.
OR
If you do not want to reorganise the channels,press EXIT to close the menu.
6The PROGRAMME ORGANISATIONmenu allows you to name channels, change
the sequence of channels and delete channels stored twice or with poor reception
quality.
Follow the instructions on the screen.Use a TV programme magazine to identify the various channels.
•Organising your channels:
Select the Select program.line.
Look for the channel that you want to assign the number 1 to with the PR +and PR -
or buttonsusing the channel logos to help you.The number already assigned appears
on the Select program.line. Select the Swap with PR line,key in 01
and press OK.The channel goes to first position:the two channels are swapped..
Repeat this procedure for the other channels.
•Deleting a channel:
Select the Select program.line and scroll through the channels using the PR + and PR -
or buttons .
When you come to a channel to be deleted,select Delete program, and press OK.
Confirm by pressing again OKbutton.
•Changing the name:
Select the Change pr.name line and choose the character to be altered with the
buttons.Scroll through the alphabet using the 1and 2buttons.
The name will be changed when you change line or leave the menu with EXITbutton.
You may subsequently return to this menu by selecting the Programme organisationline
in the INSTALLATION MAIN MENU.
OODuring the initial set-up for projection televisions,a menu for setting the convergence
appears at the end of the automatic set-up process.
Refer to the next page for information on configuring these settings.
More info
Missing channels:
Channels are searched for according to the country selected,refer to the “Manual
set-up”chapter to set up c hannels that have not been found.
For cable networks,if some channels have not been found, select Other instead of
the country and re-start an Auto update.
Decoder:
If you have connected a decoder to the AV 1 socket,after the initial set-up you should
display the MANUAL PROGRAMMING menu and confirm the Decoder
option for concerned channels.
Refer to page 9.
>English
Français
Deutsch
Italiano
Español
Português
Nederlands
Svenska
Dansk
Norsk
……
……
BB
BB
O
BB
BB
BB
BB
O
BB
BB
COUNTRY SELECTION
Return
>
United Kingdom
Eire
France
Germany
Italy
Spain
Portugal
Holland
Belgium and Luxembourg
Switzerland
Austria
……
Other
PROGRAMME ORGANISATION 01
Return
Select program. <I> 02
Swap with PR : - -
Change pr.name FR2
Delete program. 02
01 TF1
02 FR2
03 FR3
04 C+
05 FR5
06 M6
07
08
09
ETC210_en 2/05/03 17:51 Page 7