Technicolor - Thomson ETC210 specifications Switching on, UK Socket

ETC210_en 2/05/03 17:51 Page 6

Switching on

Follow the instructions on this page to use your TV set and the remote control unit before entering the channel set-up procedure described on the next page.

	0%MERCURY				V 1,5 AAA SIZE
	+						-
		DUTY		HEAVY EXTRA
-		GREENELL
	EXTRA		HEAVY
	SIZE	AAA			DUTY	+
		1,5 V
					0%MERCURY

EN

1Install two LR03 or AAA batteries in the remote control as indicated below. (see page 5).

2Connect the TV to a mains socket.

It is used to supply power to your TV which must only be supplied with 220 - 240 V ~ 50 Hz. It must not be connected to a D.C. network.

If the plug is detached from the wire, do not plug it into the mains under any circumstance as there is a danger of electrocution.

3Connect the outside aerial or cable network to the g socket at the back of the TV set.

The aerial socket (75 Ohms VHF/UHF/Cable) located at the rear of the TV set is intended for the connection of an antenna or another set fitted with a modulator (videorecorder, satellite receiver, etc.)

We recommend that you do not initially connect other equipment to your TV (VCR, decoder, etc.) so as not to complicate the set-up procedure with additional factors. Connect them up when you have finished setting up the channels by referring to page 16 of the manual.

4Switch the TV on by pressing the on/off button (A).

Depending on the model, this button is located on the front or side of the set.

The first time you switch on the television, the language selection menu appears.

5Now go to page 7 for information on the Initial set-up, or page 9 for information on how to update your channels if the channels have already been set up (if you have moved house, for instance).

Information about connecting other equipment to the AV (Audio-Video) sockets is given on page 16.

Before referring to it, complete the initial channel set-up procedure on the next page to avoid any problems with equipment selection.

More info

UK SOCKET

Equipment for the UK is supplied with a mains cable fitted with a moulded plug.

A 5

The plug contains safety components and must not be replaced by one sold by general retailers. It is fitted with a fuse that protects your television.

If your set has stopped working, the fuse may have blown.

If it has, replace it with an identical ASTA certified or BSI (BS1362) 5-amp fuse.

6