EN
8

Adjusting the convergence

Your projection television is equipped with three coloured projection tubes,one each for red,green and blue.The images (red,green
and blue) are projected onto the screen where they converge to form a single colour image.It occasionally happens that after a
certain period of operation or as a result of vibration (if you have moved the television,for instance),the convergence goes out of
alignment.This results in coloured contour appearing around people and objects, requiring the convergence to be adjusted.This
page explains this procedure.

These settings only apply to projection televisions.

CENTRE CONVERGENCE

In order to achieve an efficient setting,leave your projection television on the same
channel for about ten minutes before starting this procedure.
The CENTRE CONVERGENCE menu appears automatically at the end of the
automatic channel set-up process.
Press Red button to ajust red convergence.
Usings Up,Down, Left,Right buttons, superpose red crosses with green crosses.
Press Blue button to ajust blue convergence.
Usings Up,Down, Left,Right buttons, superpose blue crosses with green crosses.
Once the settings have been configured,press EXIT button to close this screen.
More info
During initial set-up the Centre convergencemenu appears automatically at
the end of automatic channel set-up.
If you wish to access this menu later on,display the OVERVIEW menu by pressing
the menubutton, select the option Installation and press OK to confirm.
When the Installation main menuappears, select Centre convergence
and press OK.
The Centre Convergencemenu appears.
If you press OKbutton to leave the menu, you return :
- to INSTALLATION MAIN MENUif you accessed the
CENTRE CONVERGENCEmenu from INSTALLATION MAIN MENU.
- to PROGRAMMMEORGANISATION menu if you accessed the
CENTRE CONVERGENCEmenu at the end of automatic channel set-up
process.
CENTRE CONVERGENCE
Red convergence adjustment
+ + +
CENTRE CONVERGENCE
Blue convergence adjustment
+ + +
ETC210_en 2/05/03 17:51 Page 8