IB5400GB 3/09/01 16:13 Page 11
V ideo connection settings
SCART Output
If your TV can receive RGB, select “RGB”. (recommended selection).
If your TV can receive
If your TV can only receive normal (composite) video signals via the SCART socket, select “Video”.
•If RGB is selected, there will be no output on the
DISPLAY OPTIONS |
| |
1 | Screen Format | 4x3 PS |
2 | Still State | Auto |
3 | On Screen Messages | On |
4 | Display Brightness | Auto Dim |
5 | Black Level | Normal |
6 | NTSC disc Output | PAL 60Hz |
im 7 | SCART Output | CB Video |
R RETURN | ✔ OK |
GB
NTSC Disc Output on SCART
If your monitor has only a NTSC video input, select “NTSC”. If not, leave “PAL 60 Hz” (default setting: ex factory).
S-Video Output via Hosiden socket
In order to link your DVD player up to an
1Set the VIDEO OUT SELECT button at the rear of the device to the
|
| Amplifier | Final connections | |
2 |
| 4 |
| |
|
| |||
|
|
|
| |
TV | VIDEO IN | TV | VIDEO IN | |
|
|
| ||
| 1 | DVD player |
| 7 |
|
|
|
| |
|
|
|
VIDEO OUT | VIDEO OUT |
Amplifier
DVD player
Connect the DVD player (VIDEO OUT) to the
3
amplifier (VIDEO IN) via the twin yellow plugs of the Audio/Video RCA phono cable supplied with the DVD player.
Unplug the RCA phono cable (see Step 1 above) and connect the DVD player to the amplifier by means of an
3Display the DISPLAY OPTIONS menu and set SCART output to
DISPLAY OPTIONS |
| |
1 | Screen Format | 4x3 PS |
2 | Still State | Auto |
3 | On Screen Messages | On |
4 | Display Brightness | Auto Dim |
5 | Black Level | Normal |
6 | NTSC disc Output | PAL 60Hz |
im7 | SCART Output | CB |
R RETURN | ✔ OK |
11