General operation
Switching the TV set on and off
To switch the TV set on:
-press the 
button on the side of the TV set, the 
or any numeric button on the remote control, or
-press the TV, OK or PR+/PR- buttons to switch the television on at the last channel or AV programme you were watching, or
-press the AV button to switch the television on at the last AV
EN | programme you were watching. |
|
| To put the TV set into standby mode, press the | |
| button on the side of the TV set or the | button on the |
remote control.The TV set remains powered up, but with low energy consumption.
To switch off the TV set, unplug the mains socket from the mains outlet.
Accessing channels
Using the numeric buttons:
for channels 1 to 9, press the corresponding numeric button;
for channels 10 to 99,
-press the tens digit for a few seconds to display it on the screen, then press the units digit. For instance, for programme 24, press and hold 2 to display
-press the
Using the PR+/PR- buttons: scroll through the channels. AV programmes are not included in the cycle unless you use the buttons on the side of the TV set.
Using the list of programmes: refer to page 9.
To access the channel or AV programme previously being watched, press the RETURN button.
Accessing your favourite channels
You can define the channels you watch most often as your favourite channels.This will allow you to create your own list of channels which you can access more quickly using the PR+/PR- buttons on the remote control.
1.Follow the procedure described in point 5 on page 6 for defining a channel as your favourite channel.
2.Press the PRESETS (red) button on the remote control.
3.Select the PR+/PR- keys option. Use the 
buttons to select Favourites.
When you change channels using the PR+/PR- buttons on the remote control only your favourite channels will be available.
To cancel this option, select All channels under the PR+/PR- keys option.
Note:The PR buttons on the TV set allow you to access all the channels set up, even if the Favourites option is selected
Accessing AV programmes
Press the AV button to display the last selected
AV selection loop:AV1,AV2,AV3, CMP (= component,YPrPb or YCrCb),VGA, HDMI.
Volume
Volume control: use the VOL buttons on the side of the TV set or press the 
+/- buttons on the remote control to increase or decrease the volume.
Sound mute: press the 
or 
button to temporarily mute the sound. Press this button again or the 
+ button to restore it.
Headphone volume control: press the 
+/- buttons on the remote control to display the volume control bar.Then use the 
buttons to switch to the headphone volume control bar. Use the 
+/- buttons to adjust the volume.
Displaying status information
In TV mode you can press the INFO (yellow) button on the remote control to display the number and name of the relevant channel, the time and date, the type of sound and format or zoom. If the
Press the GUIDE (blue) button on the remote control to display the name and the start time for the current programme and the following programme. If this information is not available you will receive a message to this effect.
In PC mode you can press the INFO (yellow) button on the remote control to display the time and date, the type of sound and format, as well as the source of the signal being received and the resolution.
When you switch the TV set on and change channels or exit Teletext, the channel’s number and name are displayed.
Note: If you activate the Channel number function in the Preferences menu, the channel number will be displayed permanently (see page 16).
8
