Use

JThe NAVICLICK function memorises the TV guide pages listed every morning by Teletext or NexTView and therefore enables you to display

every channel’s programme on your screen and to programme your recordings for the day with a simple click.

Before using NAVICLICK

GB

JNAVICLICK functions from the day following the first installation of the video recorder.

Your video recorder must be on standby at 3 a.m. or 8 a.m. (depending on the option chosen from the PREFERENCES menu) without programmed recording in order to enable NAVICLICK to download the information from the Teletext. Should this not be the case, you can however use NAVICLICK but it will take longer to display the programmes and you will not have the possibility of changing from one channel to another.

Consulting TV programmes with NAVICLICK

1Press the key NAVICLICK to display the NAVICLICK page.

2Use key pr+ / pr- (19) or C(10) or B(8) ) to change from one channel to another.

J This function is available on most of the channels displaying the Teletext (for satellite channels previously select SA with key AV). In the case of satellite channels, it is not possible to change channels.

Programming a recording with NAVICLICK

1Select a channel on your video recorder.

2Press key NAVICLICK and wait until the NAVICLICK page appears.

3Press keys ▲ (7) and ▼ (9) to select the programme you wish to record. Use keys pr+ / pr- (19) or C(10) or B(8) to change from one channel to the other.

4Press ok (11) to validate your choice.

5The TIMER REVIEW menu appears. Verify your programming and press exit (12) to exit the menu.

6Switch off the video recorder to put it into standby mode.

Updating NAVICLICK

JIn the event of some channels modifying their teletext structure, except in the case of a total modification of the structure, you can update the number of the first page of the teletext of the programme guide.

1Press menu (13) key to display SUMMARY menu.

2Select Installation line.

=> INSTALLATION menu appears.

3Select the NAVICLICK set up line.

4The menu which appears indicates 3 numbers of the Teletext page channel by channel: those of the current day's programmes, those of the following day's programmes and finally those of the page reserved for sub-titles.

5In order to update information, set the channel to be modified, set page number to be corrected with keys C(10) or B(8), and enter your corrections with keys 0 to 9 (21). Validate with ok (11).

13