Use

Programming a recording

JYou can programme a recording with the SHOWVIEW® programming numbers indicated in your TV magazine or by means of timer

programming if you don't know these numbers. Your video recorder has 8 programming memories. Thus, you'll be able to programme 8 recordings over a 1-year period.

Load a tape and position it to the desired section with keys REW., F.FWD., STOP, PLAY (23, 25, 27, 24).

With the SHOWVIEW® programming numbers

JWhen programming for the first time, the video recorder positions itself on channel number so that you can confirm or enter the channel number.

TUESDAY

16.25

 

F

 

 

 

UNNY

film

D

TIMES

 

 

ram

 

 

 

a-c

 

 

 

om

 

5

8624

edy

 

 

 

 

 

SHOWVIEW programming number

1Call up the SHOWVIEW menu with key showview (3).

2Enter the number of the programme you wish to record, which you will find in your

TV programme, and validate with ok (11).

ð The TIMER menu appears. The Stop time line is selected.

3You can complete your programming by selecting a recording triggered by VPS/PDC signals, recording frequency (single, daily, weekly), recording speed (SP/LP), recording sub-titles (from Teletext) at the same time as the programme.

4Press ok (11) to verify your recording time on the Timer review line : if not, press key exit (12).

5Switch the video recorder on standby-record with key B(1).

JIf the recording is through a satellite receiver, leave this switched on.

 

RECORD TIMER

Without the ShowView® numbers

Return

 

Timer No.

C❙B 7

J If you don't know the SHOWVIEW number of the programme

Programme No.

Pr - - - - -

you wish to record, you'll have to use the RECORD TIMER

Start time

- - : - -

menu.

Stop time

- - : - -

 

Date

2 0 / 0 7

1 Display the SUMMARY menu with the key menu (13)

VPS/PDC

No...

2 Select Record Timer line with key ▼ (9) and

How often

Once...

validate with ok (11).

Speed

SP...

Subtitle

Yes...

ð The RECORD TIMER menu comes up.

Clear timer

7

3 With the keys 0 to 9 (21) or keys (10) or B(8), to

Timer review

 

enter the channel number you wish to record or if not

 

 

 

 

select an AV socket.

 

 

4Enter the following information by selecting the corresponding line with the ▼ (9) key, then with the keys 0 to 9 (21) or keys C(10) or B(8) :

14

SHOWVIEW is a registered trademark of Gemstar Development Corporation.

 

 

The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.