Important

Precautions

SETTING UP - Ensure that the mains supply in your house complies with that indicated on the identification sticker located on the back of your appliance. Install the video recorder horizontally, away from any source of heat (fireplace) or appliances creating strong magnetic or electric fields. The components of

this video recorder are sensitive to heat. The maximum ambient temperature should not exceed 40° Celsius. Leave sufficient space around the video recorder to allow adequate ventilation: 10 cm on either side and at the rear, as well as 7 cm above the top are minimum requirements. The humidity of the room should not exceed 80%. If you have to use the video recorder outdoors, do not expose it to water from rain or splashing. Moving it from a cold atmosphere into a warm one is likely to cause condensation on some components inside the video recorder. Let the condensation disappear by itself before turning the video recorder on again.

7 cm

 

7 cm

10 cm

10 cm

10 cm

USE - If your appliance, or a cassette, has been stored in a very cold atmosphere for a certain amount of time (transported during winter for example), wait approximately 2 hours before using your video recorder. The openings located on the top and the bottom are for ventilation purposes. They should not be obstructed. During thunder storms, we recommend that you disconnect the video recorder from the mains and aerial so that it is not affected by electrical or electromagnetic surges that could damage it. For this reason, keep the mains socket and aerial socket accessible so they can be disconnected. When the unit is on standby, some components remain connected to the mains. To fully disconnect your set, you have to unplug the mains connector from the mains socket. Immediately disconnect the video recorder if you notice it giving off a smell of burning or smoke. Under no circumstances whatsoever must you open the video recorder yourself. You risk electrocution if you do so.

CLEANING – Use a soft, dry and clean cloth. Regularly dust the vents at the back or sides. Using solvents, abrasive or alcohol based products risks damaging the set. If an object or liquid enters inside the appliance, unplug it immediately and have it checked by an authorised technician. To avoid deterioration of your video recorder’s heads, never use a cleaning tape.

Guarantee

The type and production number of your appliance are printed on the guarantee certificate delivered with your video recorder. Keep this certificate as well as the invoice. These documents are indispensable for claiming your guarantee rights. All repairs during the guarantee period must be carried out by an authorised technician representing our brand. If this condition is not met, your rights will no longer be valid. Never open the appliance yourself, since this may be dangerous for you or damage the equipment. Thomson Multimedia is not liable if the video recorder is used other than in accordance with this manual.

Prior to using your video recorder, you'll have to follow the set-up procedure and make the settings described on pages 2 to 7.

Contents

Installation

Before you start . . . . . . . . . . . . . . . . . . . .2 Making the connections . . . . . . . . . . . . .3

Initial installation . . . . . . . . . . . . . . . . . .4 Auto installation - New or encoded channel - Sorting the channels - Clock setting

Satellite / cable receiver . . . . . . . . . . . . .6

Recommended connection scheme -

GB

Video recorder settings

Other sets . . . . . . . . . . . . . . . . . . . . . . . . .8

Sockets AV1 / AV2 / AV3 / AV4

Use

Using the remote control . . . . . . . . . . . . .9 Controlling the video recorder - Programming the code of another set - Controlling the television set

Controlling the operation . . . . . . . . . . .10 On the display - On the screen

Viewing a tape . . . . . . . . . . . . . . . . . . . . . . . .11 Watching a channel via the video recorder - Viewing a tape - Play - Accelerated play -

Still image - Pause - Variable slow motion - Stop Rewind or Fast forward - Ejection of the tape

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Preparing the recording - Simple recording, with automatic stop, "S.O.S. record" - Mark a scene with an index

NAVICLICK . . . . . . . . . . . . . . . . . . . . . . . . .13 Before using NAVICLICK - Consulting TV programmes with NAVICLICK - Programming a recording with NAVICLICK - Updating

NAVICLICK

Programming a recording . . . . . . . . . . .14

With the SHOWVIEW® numbers - Without the

SHOWVIEW numbers - When the video recorder is programmed - Deleting a programmed recording - Recording programmed by an external connected unit - Error messages likely to occur when programming

Tape library . . . . . . . . . . . . . . . . . . . . . .16 New tape - Organising recordings on a tape - Looking for a recorded programme

Tape control . . . . . . . . . . . . . . . . . . . . . .18 Index search - Introduction search - Clear index - Access to counter - Access to remaining time - Tape type – Auto Sequence Memory

Sound adjusting . . . . . . . . . . . . . . . . . . .19 Adjusting the sound in the play mode

Setting the type of sound to be recorded

Picture adjusting . . . . . . . . . . . . . . . . . .20 Tracking - Sharpness - Stability - Format -

S cassette - VHS - TVNTSC - Copy - Black and white - Colour system

Adjusting preferences . . . . . . . . . . . . . .22

Audio dubbing - Auto Sequence Memory.24

Other functions . . . . . . . . . . . . . . . . . . .25 Electronic key - Continuous play / recording - VPS/PDC system - Concerning video tapes

More information . . . . . . . . . . . . . . . . .26 TV set and video recorder code lists

Technical features . . . . . . . . . . . . . . . . .27

JON THIS USER MANUAL: This user manual being common to several VCR models, some 1 functions or settings may not be available on the model you have bought.