Technics DP-1810P manual General Functions for Key Operator

Function

General Functions for Key Operator

No.	Modes	Function		Initial
				Setting
01	AUTO RESET TIME	Selects the Control Panel reset time.		1 min.
		COFF, 30 sec, 1 min., 2 min., 3 min.,
		4 min.
02	ENERGY SAVER MODE	Sets the Energy Saver mode and time.		SLEEP
		CINVALID, ENERGY-SAVER, SLEEP
		Energy save mode timer : 1-120 minutes
		Sleep mode timer	: 1-120 minutes
04	LANGUAGE DEFAULT	Selects the message language of the display.		A-ENGLISH
		CA-ENGLISH, C-FRENCH, SPANISH
05	SPECIAL TRAY 1	Sets the paper tray for special paper (ex: colored).		NONE
		CNONE, TRAY 1, TRAY 2, BYPASS
06	SPECIAL TRAY 2	Sets the paper tray for special paper.		NONE
		CNONE, TRAY 1, TRAY 2, BYPASS
09	KEY/TOUCH BEEP	Sets the panel touch sound.		SOFT
		COFF, SOFT, LOUD
10	BYPASS SET BEEP	Sets the sound when put paper(s) on bypass		INVALID
		tray.
		C1: INVALID 2: VALID
11	ORIG.SET BEEP ADF	Sets the sound when put paper(s) on ADF.		VALID
		C1: INVALID 2: VALID
14	DEPT. COUNTER MODE	Monitors copy usage of each department.		Consult
		(1) TOTAL COUNTER		your
		(2) DEPT. COUNTER		service
		(3) DEPT. COUNTER LIST		technician.
22	TCP/IP ADDRESS	∗ Sets the IP Address assigned to your machine.		Contact
		C3 digit × 4 (Use the MEMORY IN key to		your
		enter the "." between each set of 3-digit		Network
		numbers)		Adminstrator.
23	TCP/IP SUBNET MSK	∗ Sets the Subnet Mask.		Contact
		C3 digit × 4 (Use the MEMORY IN key to		your
		enter the "." between each set of 3-digit		Network
		numbers)		Adminstrator.
24	TCP/IP G/W ADDR.	∗ Sets the Subnet Mask.		Contact
		C3 digit × 4 (Use the MEMORY IN key to		your
		enter the "." between each set of 3-digit		Network
		numbers)		Adminstrator.
25	COPY SETTING LIST	Prints list containg Current Setting and
		Standard Setting.

NOTE	CIt is necessary to input the Key Operator ID code before changing items on
	this page.

CThe Special Tray 1 and 2 are not auto-selectable in the switching mode. ∗ Not available for plain copier, but will be available when installing options

for advanced functions. (See page 50)

28