Cap | Technics DP-1810P guide

Problem Solving/U13

Adding the Toner and Replacing Toner Waste Container (?)

1	Open the front cover.
	Open the front cover.
2	Remove the toner waste container by
	Remove the toner waste container by
	slowly pulling it towards the left as
	illustrated.

3

Cap

Seal the container with the enclosed cap and dispose of it properly.

4	1
	1
	2

#Turn the empty Toner Bottle

counter-clockwise until it stops. The Arrow mark (Unlocked symbol ) visible on the end of the Toner Bottle is aligned with the Arrow

mark on the machine.

Note: To prevent toner spill, ensure that the key is facing upwards before removing the toner bottle.

$Pull out the empty Toner Bottle. Note: If the bottle will not pull out from

the machine, turn the bottle slightly in either direction to release the key and try it again.

J

?

ATTENTION	CFor optimum copy quality use the recommended Panasonic toner. Store toner in a cool
	dark place. Do not unseal toner before use. Use it as fast as possible after unsealing.

CWhen U13 is displayed the Add Toner Warning Indicator will begin to flash.This message is to prompt you that the toner bottle is nearly empty (approx. 300-sheets can be printed). This message will continue to be displayed until the bottle is replaced. When the count- down counter reaches 0, the copier will stop operating. To clear the message and enable the copier to operate, replace the empty toner bottle with a new one.

39

Image 39

Technics DP-1810P manual Adding the Toner and Replacing Toner Waste Container ?, Cap

Contents

Before Starting OptionsEnglish Others Model and Serial Number Important Information Common Features and Usage Operation Chart Energy Star Table of Contents Problem Solving OptionsOthers Manufacturer’s name and address Factory ID PrecautionsFor Your Safety Laser Safety Toner and Paper Ventilation Handling FCC Warning For U.S.A Installation Control Panel Interrupt Key, Memory In Key, M1/M2 Keys Contents Refer to Stop KeyLCD Display Start Key $Select exposure control Basic CopyFull Size Copying Copying the Same Size Originals Size Copying with Preset RatiosReset Reduction or Enlargement Copying Zoom Zoom Copying Sheet Bypass Side Guides Using the Sheet Bypass$Adjust the side guides Copying on Special Paper, etc 1 key Creative FeaturesProcedure 1 Copy Copy Copy Margin Book/Edge/MarginBook Edge $Press the Memory In F2 key Job MemoryTo store a job in memory To recall a job stored in memory Sort Copy Sort CopyFrom Platen Glass only Sleep Mode Other FeaturesEnergy Saver/Interrupt Mode Energy Saver Mode Normal Skyshot ModeDigital Skyshot Mode None Platen Manual Skyshot Mode Copy Combined Function TableOriginal Sort Input Identification Code Using Function Modes to Change the Initial Copy ModesFunction Options General Functions Modes Function Initial Setting Modes Function Copier Settings General Functions for Key Operator Copier Settings for Key Operator Function Setting Changing the Auto Exposure SettingPress the Function Key Proceed as Follows Function Setting for Key Operator Changing the Paper SizeB5R Stopper Guide a Paper Guide b Paper Functions Departmental Counter Select the Department Counter Mode Components Accessories $2 in 1 Copy Automatic Document FeederADF DA-AS180 # Automatic Original Feeding Inappropriate originals Place Original Problem Solving Adding Paper JSheet Paper Tray Cap Adding the Toner and Replacing Toner Waste Container ? Problem Solving Paper Misfeed Locations Removing a Misfed Paper Paper Exit Area Surface Paper Entry/Transport AreaHot Heated Paper Feed Module ADF Unit Does Not Operate TroubleshootingBefore Calling Service Check Action Marked Copies Light Copies Glass User Error Codes U CodeCode Display Message Check Points Cover DP-1810P Copier Specifications 2nd Paper Feed Module DA-DS182 Specifications Part Name Remarks Options and SuppliesFor Printer SuppliesPage Page Warranty