Other Features, Energy Saver/Interrupt Mode | Technics DP-1810P

Other Features

Energy Saver/Interrupt Mode

Interrupt (F1) Key Energy Saver Key

�

	ENERGY SAVER	■ These modes can save power while the copier is
	ENERGY SAVER	not in use.
		not in use.
		Energy Saver Mode
		#To enter this mode
		Press the Energy Saver key or the copier will
		automatically enter the Energy Saver Mode after 15
		minutes* from the last copy. The indicator will flash.
		$To cancel this mode and make copies
		Press the Energy Saver key again.

Sleep Mode

#Automatically enters the Sleep Mode after 30 minutes from the last copy. The copier power will drop and the indicator will light.

				$To make copies, press the Energy Saver key.
				Interrupt Mode
INTERRUPT				CThis mode can interrupt other copy jobs while
				making copies.
				#Press the Interrupt (F1) key, the indicator will


				light.
				$Make another copy job using the platen glass.

%Press the Interrupt (F1) key again to continue the original job.

Note: The ADF can not be used with interrupt. (Use only the Platen)

NOTE	∗ Energy saver time (15 minutes) and Sleep time (30 minutes) can be changed
NOTE	by the key operator. (See page 28)
	by the key operator. (See page 28)

	Modes	Power Consumption		Warm Up Time

	Normal Operation	Approximately	92 Wh	N/A
	Energy Saver Mode	Approximately	40 Wh	30 sec. recovery
	Sleep Mode	Approximately	1.5 Wh	30 sec. recovery

Making Copies

21

Image 21

Technics DP-1810P manual Other Features, Energy Saver/Interrupt Mode, Energy Saver Mode, Sleep Mode

Contents

Before Starting OptionsEnglish Others Model and Serial Number Important Information Common Features and Usage Operation Chart Energy Star Table of Contents Problem Solving OptionsOthers For Your Safety PrecautionsLaser Safety Manufacturer’s name and address Factory ID Toner and Paper Ventilation Handling FCC Warning For U.S.A Installation Control Panel LCD Display Contents Refer to Stop KeyStart Key Interrupt Key, Memory In Key, M1/M2 Keys Full Size Copying Basic CopyCopying the Same Size Originals $Select exposure control Reset Copying with Preset RatiosReduction or Enlargement Copying Size Zoom Zoom Copying $Adjust the side guides Using the Sheet BypassCopying on Special Paper, etc Sheet Bypass Side Guides Procedure Creative Features1 Copy 1 key Copy Copy Book Book/Edge/MarginEdge Margin To store a job in memory Job MemoryTo recall a job stored in memory $Press the Memory In F2 key Sort Copy Sort CopyFrom Platen Glass only Energy Saver/Interrupt Mode Other FeaturesEnergy Saver Mode Sleep Mode Digital Skyshot Mode Skyshot ModeNone Normal Platen Manual Skyshot Mode Original Combined Function TableSort Copy Function Using Function Modes to Change the Initial Copy ModesOptions Input Identification Code General Functions Modes Function Initial Setting Modes Function Copier Settings General Functions for Key Operator Copier Settings for Key Operator Function Setting Changing the Auto Exposure SettingPress the Function Key Proceed as Follows Function Setting for Key Operator Changing the Paper SizeB5R Stopper Guide a Paper Guide b Paper Functions Departmental Counter Select the Department Counter Mode Components Accessories ADF DA-AS180 Automatic Document Feeder# Automatic Original Feeding $2 in 1 Copy Inappropriate originals Place Original Problem Solving Adding Paper JSheet Paper Tray Cap Adding the Toner and Replacing Toner Waste Container ? Problem Solving Paper Misfeed Locations Removing a Misfed Paper Paper Exit Area Hot Paper Entry/Transport AreaHeated Surface Paper Feed Module ADF Before Calling Service TroubleshootingCheck Action Unit Does Not Operate Marked Copies Light Copies Code Display Message Check Points User Error Codes U CodeCover Glass DP-1810P Copier Specifications 2nd Paper Feed Module DA-DS182 Specifications For Printer Options and SuppliesSupplies Part Name RemarksPage Page Warranty