Daily Operation
5
➜To switch on, press the Power key on the front
panel of the TV set.
➜Use either the Standby/ on key on the remote
control unit.
Or
➜Use the Programme keys on the remote control
unit.
Or
➜Use the keys 0 to 9 on the numeric keypad.
Or
➜Use the two keys on the left of the panel behind
the cover on the TV set.
The mode display light will change from red to green.
➜Use the Power key on the set, or the Standby/
on key on the remote control in order to switch off
the TV set.
If the Standby/ on key was used to switch off
the set, it will go into standby mode, and can
be switched on again using the Standby/ on
key.
The eco-standby mode ensures a very low
power requirement of only 1W.
Note:
The last switching command given by the
remote control, whether On or Off, will be sto-
red in memory by the set.
Should the set have been switched of via the
Power button on the set while in this operatio-
nal mode, repeated pressing of the Power
key will result in the set being switched on,
and not into standby mode.
Should you experience a power failure, we
recommend you switch the set off via the
Power key, so as to avoid the set swit-
ching itself on again unintentionally later.
Using the remote control
➜Press the Volume keys to adjust the volume of the
built-in loudspeakers.
A bar representing the current volume level
will be displayed on-screen.
Using the controls on the TV set
➜Press the marked area on the covering flap on the
front panel of the TV set.
➜Use the two keys on the right to adjust the volume.
➜Press the Programme keys to select a new chan-
nel.
In addition, the programme place in the list, the
channel logo and the status of sound reproduction
will be displayed.
The status of sound reproduction modes may be one
of the following:
mono stereo dual
➜By pressing a number or several numbers within a
space of 3 seconds, a new channel can be selec-
ted directly.
➜Press the OK key to see the
list of programmes on screen.
➜Use the Programme keys to
select a new programme, and
confirm by pressing the OK key.
Hint: In order to select the
programme more quickly,
use the Volume keys to
page through the list in
blocks of 19 programmes
at a time.
➜Press the marked area on the covering flap on the
front panel of the TV set.
➜Use the two keys on the left to select a new chan-
nel.
➜Pressing the Switching key will switch to the pro-
gramme previously selected.
Each time the channel switch key is pressed,
the programme number, name of the channel
and status of sound mode will be displayed
briefly.
➜Press the yellow ?key to display or hide a table of
hints.