TechniSat Car Radio manual Dolby B noise suppression, Tape type adjustment

3Detailed instructions

3.3.4Dolby B noise suppression

The TechniSat WERRA 1 is equipped with the Dolby B noise suppression system which clearly improves the reproduction of cassettes recorded with this system.

- You can switch on the noise suppression during the reproduction by shortly pushing the 6 button.

A symbol appears on the display.

-The noise suppression can be switched off by pushing

the 6 button again.

Shortly push button 6 for noise suppression; push again to switch off

S t ep 1

3.3.5 Tape type adjustment

The cassette drive mechanism is suitable for normal and chromedioxide tapes as well as for metal tapes.

If a metal tape is inserted you only have to carry out the following switching (see right):

-You can switch on the adaptation during the reproduction by shortly

pushing the 5REP button.

MTL

The letters “MTL“ are indicated on the display.

-This adaptation can be switched off by a further push on

the 5REP button.

MTL

3 Detailed instructions

MTL

Shortly push button 5 for tape selection; push again to switch off

S t ep 1

3.3.6 AMS (Automatic Music Search) function

When playing the cassette this function enables to wind to the beginning of

the next title or to the beginning of the title which is currently running. However,

the basic requirement for this is that there are recording intermissions of at

least 3 seconds between the individual titles.

tep	2
S

-beginning of the next title - beginning of the current title

AMS

Shortly push button 4 to switch on the AMS mode; push again to switch it off

S t ep 1

Switching on the AMS mode:

- Shortly push the 4 4SHUFF button during reproduction.

AMS

The letters “AMS“ are indicated on the display.

19