3 Detailed instructions

3.1.7 Security code

Your TechniSat WERRA 1 is equipped with a security code to prevent operation by unauthorized persons after the radio has been removed or disconnected from the power supply.

The device may be operated again when the code number has been entered.

Attention: The security code is not activated when the device is supplied!

Adhere the attached sticker to the side window of your car to scare off potential thieves.

Entering the code:

The specific code of your TechniSat WERRA 1 is shown on the enclosed code card. Never keep this card together with your car radio as the security code will have no effect in case of a theft.

Autoradio TechniSat WERRA 1

Germany

ID-Card

 

Anti-Diebstahlcode

Made in

 

Keep this card safely (not in your car)

Qualität

 

Deponieren Sie die Karte an einem sicheren Platz

 

(nicht im Auto)

 

3 Detailed instructions

-Turn on the radio as described in 3.1.1.

If the device is locked “C*“ will appear on the display.

- Enter the first digit of the code number by pushing the << or >> button

-Confirm this by pushing the . BAND button.

-Now enter the remaining three digits of the code as described above and store each of them by pushing the BAND button.

Do not forget to also push the BAND button after having entered the last digit. After approx. 25 seconds a signal tone sounds to finally confirm the input. If the device is switched off before this confirmation is received it is necessary to enter the number again when the unit is switched on.

tep

2

S

 

Select

 

number

1

 

p

 

e

 

t

 

S

 

Switch on

Re-confirm

 

 

every digit

 

S t ep 3

9

Page 9
Image 9
TechniSat Car Radio manual Security code, Entering the code