ted starting time, you can enjoy the programme at the
desired time.
7.4 Volume control
You have the option of adjusting the volume of your digital
receiver. This makes using your receiver even more conve-
nient, since all important functions are combined on the recei-
ver remote control, and you will only rarely need to use the
remote control of your television set. When you switch on the
digital receiver, the volume will be set to the level last selec-
ted.
> Adjust the volume of your receiver by using the keys
Volume + to increase the volume and Volume - to
reduce the volume.
> Press the key Sound on/off to switch off the sound
(mute), press the same key again to switch the sound
on again.
7.5 Selecting another language
Where a programme is broadcast in several languages, or
with several sound channels, this will be indicated on screen
(Fig. 7-10). You can then proceed as follows to select another
language or another sound channel:
> Press the key Language select. A list of the lang-
uages currently being broadcast will be displayed on
screen (Fig. 7-11).
> Use the up/down arrow keys to select the prefer-
red language, and confirm by pressing OK.
You can now listen to the programme in the desired langua-
ge. Your digital receiver is also equipped to receive mono
broadcasts.
> Use the left/right arrow keys to select from Mono
channel 1 ( ), Mono channel 2 ( ) and Stereo
().

7.5.1 Dolby Digital (AC3 mode)

Where a programme is broadcast in Dolby Digital sound, this
will be indicated by the Dolby logo in the information box
when you switch to the appropriate programme. If the func-
tion Dolby Digital (AC3) has been activated in accordance
with Point 6.3.6, the programme will automatically be pres-
ented in this format.
If you have not activated the function Dolby Digital (AC3),
you can set the unit to AC3 mode manually as follows:
> Press the Language Select key. Where available,
a list will now appear on screen showing the currently
available languages as well as Dolby Digital (AC
3).
> Use the up/down arrow keys to select the line
25
(Fig. 7-3)
(Fig. 7-4)
(Fig. 7-2)
Bed_anl_.qxd 20.02.04 16:28 Seite 25