TechniSat TechniBox VIACAM instruction manual Adjustments for the External Unit

15

Picture format TV Set:

Use the OK key to select either the 4:3(standard) or 16:9(widescreen) picture format, in accordance with the features of your TV set. This function automatically adjusts the picture format to the specifications of your TV set.

Sound (Audio)

Use the OK key to select your preferred language. Where a programme is broadcast with several language soundtracks, this feature will automatically select your preferred language, if available.

UHF Output Channel

See Point 4.4

Scart Mode

Use the OK key to select either FBAS, RGB or S-VHS, in accordance with the specifications of your TV set. For standard equipment retain the default setting RGB.

Sub-titles

Your DVB receiver has the facility to display sub-titles. Provided the function Sub-titles has been enabled, and the preferred language selected in terms of the Audio signal selection is available, the sub-titles will be superimposed on the picture automatically. If the function has

not been enabled, it can be set manually, Sub-titles are indicated by the symbol in the information display. Please also refer to Point 6.12 in this instruction manual.

5.4 Adjustments for the External Unit

Once you have made all the individual selections, to make the receiver conform to your pre- ferences, it may still be necessary to make some adjustments for the receiver to work opti- mally with your antenna/satellite dish. The default factory setting is pre-programmed for reception of ASTRA and EUTELSAT broadcasts by means of a universal LNB (see Glossary at end for technical terms). Once the receiver has been connected to an external reception unit and switched on, these programmes can be received without any further adjustments. Should you also wish to receive signals from other satellites, or if you have a different type of LNB, you can make the following adjustments in your receiver to provide for these program- mes:

>Press the Menu key to display the Main Menu

>Use the up/down arrow keys to select the entry Settings.

>Confirm by pressing the OK key.

The menu Settings will be displayed.