Thank you for purchasing this Quick and Hot water urn. Please read the instructions common to all of our models carefully and keep them in a safe place.

GB

PRODUCT DESCRIPTION (fig. 1)

A water tank

G automatic mug button for pre-setting

B tank lid

quantity

C water release valve

H manual “continuous water supply” button

D body of the appliance

I water volume selector (according to model)

E nozzle or water outlet

J filter cartridge (according to model)

 

K ON/OFF and filter cartridge change light

 

(according to model)

RINSING BEFORE USING FOR THE FIRST TIME

1Remove all of the packaging, stickers and accessories from the interior and exterior of the appliance.

2 Remove tank A and clean it in water, taking care that no particles remain in the tank.

3 Then fill the tank A with cold water and reposition it firmly on its base D making sure that the release valve C is properly engaged (fig. 1a, 1B and 2).

4 Plug in the appliance to an electrical supply of the correct voltage.

5 Place a container that holds approximately 1.5 litre under tap E

6 Press the continuous water supply button H: hot water will begin to run out (fig. 3). When operating for the first time, it is normal that a little steam escapes from nozzle E.

7 When the container is almost full, release the continuous water supply button H to stop the flow. Discard the water.

INSTALLING THE CLARIS FILTER CARTRIDGE

(according to models)

•We advise you to get the best taste and service lifetime of your appliance by using the Claris - Aqua Filter System cartridge. This cartridge contains an anti-lime substance and activated carbon that reduces chlorine, impurities, lead, copper, pesticides, etc. that are present in water. Minerals and trace elements, however, are preserved.

1Unwrap cartridge J. Takenote of the month in which the cartridge is put in use by sliding the upper ring of the filter to the use start date (fig. 4). You should change your Claris Filter Cartridge every 4 to 6 weeks (or every 50 litres), according to the hardness of your water.

Certain models also have an indicator light K which indicates when it is necessary to change the cartridge. For these models, when this light K flashes during use, it is time to change the cartridge (fig. 5).

2

Position the cartridge in tank A and screw the cartridge J a quarter turn into the bottom of the tank.

3

To replace the cartridge, remove the used cartridge and fit a new Claris Aquafilter system cartridge sold as

 

an accessory (Ref. XH 5000) (fig. 6).

4For models with an indicator light, it is necessary to record the change of the cartridge by simultaneously pressing the “continuous water supply” button and the mug pre-select button G for 5 seconds (fig. 7). After 5 seconds, the indicator light will go out. The appliance will then have recorded the cartridge change.

•The Claris AquaFilter cartridge can be installed in all Tefalwater urns, including those that did not have it on purchase.

11