1800119351 GV7080 E0 GTK _110X154 13/07/10 09:38 PAGE5

Description

1.

Steam control button

10.Steam cord storage clip

2.

Iron temperature adjustment dial

11.Boiler rinse cap cover/ Boiler rinse cap

3.

Iron thermostat light

12.Control panel

4.

Iron rest

a -

Restart button

5.

Power cord storage space

b -

“Steam ready” light

6.

Power cord

c -

“water tank empty” light

7.

Water tank

d -

“boiler rinse” light

8.

Steam generator boiler (in the base unit)

13. Lock-System hoop (depending on model)

9.Iron-base steam cord

Locking system for retaining the iron on the base - Lock system

(depending on model)

Your steam generator is equipped with a retaining hoop which locks the iron on its base for easier transport and storage:

-Locking - fig.1

-Unlocking - fig.2

To carry your steam generator by the iron handle:

-Place the iron on the iron rest of the generator and raise the retaining hoop over the iron until it locks into place (audible click) - fig.1.

-Grasp the handle of the iron to carry your steam generator - fig.3.

Preparation

What water may be used ?

•Your iron has been designed to operate using untreated tap water.

Ifyourwaterisveryhard

However, in some coastal regions, your water may have a high salt

(checkwithyourlocalwater

content.Inthiscase,onlyusedemineralisedwater.

authority)itispossibletomix

•Heat concentrates the elements contained in water during

untreatedtapwaterwithstore-

evaporation. The types of water listed below contain organic waste or

boughtdistilledordemineralised

mineralelementsthatcancausespitting,brownstainingorpremature

waterinthefollowingproportions:

wear of the appliance: water from clothes dryers, scented or softened

50%untreatedtapwater,

water, water from refrigerators, batteries or air conditioners, pure

50%distilledordemineralised

distilledordemineralisedwaterorrainwatershouldnotbeusedinyour

water.

iron.Alsodonotuseboiled,filteredorbottledwater.

 

Filling the water tank

Place your steam generator on a stable, flat heat-resistant surface.

We recommend that you use a mesh type ironing board to allow steam to pass through the garments for better ironing results and also to prevent steam venting sideways.

Check that your appliance is unplugged and open the flap on the tank.

Pour in untreated tap water up to the max mark - fig.4.

Using your steam generator

• Completely unwind the power cord and the steam cord from its

The first time the appliance is

storage space .

used, there may be some

• Tilt the locking ring of the iron forwards to release the safety catch

fumes and smell but this is not

(according to the model).

harmful. They will not affect

• Plug in your steam generator to an earthed socket.

use and will disappear rapidly.

• The boiler heats up - fig.14.

 

When the green “steam ready” light stops flashing (after 2

 

minutes approximately), the appliance is ready - fig.15.

 

Use

Steam ironing

Placetheiron'stemperaturecontroldialaccordingtothetypeoffabrictobeironed(seetablebelow).

Thethermostatlightcomeson.Becareful!Thesteamgeneratorisreadywhenthethermostatlightgoesout

5