5085592-RICE COOKER:NOTICE YC4 10/11/08 9:48 Page 4

Note: When using risotto rice for milk rice pudding or dessert puddings follow the proportions in the recipe book as more water is needed.

When cooking milk rice pudding, use Arborio risotto rice instead of pudding rice, as it cooks quicker and gives better results. Follow the instructions in the recipes. Do not cook the rice directly in milk as it will froth up and boil up through the lid.

Cooking with delayed start

It is possible to delay the time for starting cooking. Take the rice cooking mode as the example.

Place the ingredients in the bowl and plugged in the appliance, briefly press the "PRESET" key– Fig. 8, press again to select the finished cooking time you want. Then press the “RICE/STEAM” key – Fig. 9. The red "RICE/STEAM" indicate light flashes for 5 seconds. After 5 seconds the light remains steady and the cooking automatically starts.

For instance: it is 8 a.m, I would like my rice is ready at 6 p.m which means I want my riceisreadyafter10hours,Ihavetopress"PRESET"keyuntil“10”showsonthedisplay, then press the "RICE/STEAM" key and wait the "RICE/STEAM" indicate light remains steady.

When cook finished, it will turn to keep warm automatically, the "KEEP WARM" indicate light is on,display shows "b"– Fig. 11.

You can delay cooking for 2 hours minimum and 15 hours maximum.

Cooking with delayed start is for all cooking modes.

Rice and Quick cooking

The rice cooker itself determines the exact cooking time depending on the quantity of water and ingredients placed in the bowl (see cooking table above for a guide to times).

When the volume of water has been absorbed by the rice, the appliance stops the cooking process automatically and passes into the “KEEP WARM" mode (the red “KEEP WARM” indicate light comes on).

The cooking times given in the tables are only approximate and for your guidance.

Place the appliance on a flat, stable, heat-resistant work surface away from water splashes and any other sources of heat.

Pour the required quantity of rice into the bowl using the measuring cup provided. Then fill with cold water up to the corresponding “CUP” mark printed in the bowl (See cooking guide above) – Fig. 7.

Close the lid.Note: Always add the rice first otherwise you will have too much water.

Check that the appliance is plugged in. Briefly press on the “RICE/STEAM” key – Fig. 9. The red “RICE/STEAM” indicate light flashes for 5 seconds. After 5 seconds the light remains steady and the cooking automatically starts.

For the rice cooking: it will stew rice for 14 minutes when the water evaporated out and system begin to count down 14 minutes.

For the quick cooking: Briefly press on the “QUICK” key– Fig. 10. The red “quick "QUICK" indicate light flashes for 5 seconds. After 5 seconds the light remains steady and the cooking automatically starts. It will stew rice for 10 minutes when the water evaporated out and system begin to count down 10 minutes.

When stewing finished, it will turn to keep warm automatically, the "KEEP WARM" indicate light is on,display shows "b"– Fig. 11.

After each use empty and clean the condensation collector.

Some recommendations

for best results when cooking rice

Measure out the rice and rinse it thoroughly under running water in a sieve for a long time (except for risotto rice which should not be rinsed). Then place the rice in the bowl together with the corresponding quantity of water.

Make sure that the rice is well distributed around the whole surface of the bowl, in order to allow even cooking.

Add salt to your personal taste if required.

4