ACTIFRY2EN1_5087420_MISE EN PAGE 1 29/04/12 08:43 PAGE9
When using the bowl on its own, never place the tray in the appliance.
Do not use the paddle without the bowl.
Do not leave the measuring spoon inside the 2in1 while cooking the food.
Prepare the food
•Open the lid – fig.1.
•Remove the 2in1 spoon – fig.3 and the tray – fig.7.
•Lift the handle up – fig.4 and remove the bowl from the appliance.
•Place your food in the bowl making sure you always keep to the quantities recommended in the cooking tables and/or the recipe book (please see: “Cooking table for bowl only”). Never exceed the "MAX“ level marker – fig.10.
•Depending on the food, add the recommended amount of oil in the 2in1 spoon and pour the contents evenly in to the bowl – fig.11.
•Put the bowl back into the appliance and close the lid.
•Push the handle back – fig.12.
EN
FR
EL
AR
FA
Using the bowl on its own
Start cooking
•Connect the detachable power cord to the appliance and plug it in
– fig.13.
•Push the switch 0/ – fig.14,the appliance will make a beep sound and the screen displays 00.
•Adjust the cooking time using the buttons 
– fig.15 (see “Cooking table“). The maximum cooking time that can be programmed is 60 minutes.
•Press the start button 
– fig.16. The minute countdown starts. The countdown will only be displayed in seconds when there is less than a minute left.
•You can adjust the cooking time at any time by pressing on the buttons
Opening the lid stops the cooking. You can the start the cooking again by pressing on the start button
after it has been switched off.
Once the lid has been open for 2 minutes the appliance will go into
– fig.17.
Remove the food
•When the cooking is finished, the timer will sound and the screen will start flashing and displaying 00 – fig.18: the appliance automatically stops cooking your food. You can stop the buzzer by pressing on the start button
– fig.19.
•Open the lid – fig.20.
•Lift the handle up until you hear the “CLICK” sound – fig.21.
•Remove the bowl and take the food out.
9
