2 in1

ACTIFRY2EN1_5087420_MISE EN PAGE 1 29/04/12 08:43 PAGE13

Using the 2in1: bowl + tray

Get your food ready

Open the lid – fig.1.

Remove the 2in1 spoon and the tray – fig.3, 6 & 7.Lift the handle up - fig.4 and remove the bowl from the appliance

Place your food in the bowl making sure you always keep to the quantities recommended in the cooking tables and/or the recipe book

(please see “"Cooking table for 2in1”). Never exceed the "MAX“ level marker on the paddle – fig.10.

Depending on the food, add the recommended amount of oil in the 2in1 spoon and pour the contents evenly in to the bowl – fig.11

Put the bowl back in the appliance and close the lid.Fold away the handle – fig.12.

EN

FR

EL

AR

There is a pre-set time for each type of food which you can adjust.

When you are not using it, the appliance will automatically switch itself off after 10 minutes.

Start the 2in1 cooking FA

Connect the detachable power cord to the appliance and plug it in – fig.13.

Push the switch 0/ , the appliance will make a beep sound and the screen displays 00 – fig.14.

Adjust the total cooking time (= time to cook food in the bowl) using the buttons (see “Cooking table for 2in1“) – fig.15.

Select the type of food you want to cook in the tray using the button
– fig.23 and 24.

Adjust the cooking time for the tray using the buttons (please see “Cooking table”).

Push the start button 2 in1 . The cooking of the food in the bowl starts.The minute by minute countdown starts.

While the food is cooking in the bowl, get the food ready for cooking on the tray. Make sure you don't exceed the maximum level mark on

the tray – fig.22.

When the appliance beeps and stops automatically, open the lid and put the tray in – fig.25.

Close the lid again and press the start button 2 in1 .The countdown resumes.

Remove your food

When the cooking is finished, the timer will sound and the screen will start flashing and displaying 00: the appliance automatically stops

cooking your food. You can stop the buzzer by pressing on the start
button 2 in1 – fig.19.

Open the lid – fig.20.

Lift up the handle until you hear the “CLICK” – fig.21.Disconnect the two handles by pressing the button 10b.

Turn over the tray handle and slide back the green clip, fit the tray handle onto the tray and slide back the clip fully to lock it – fig.26.

Remove the tray and take your food out – fig.27.Remove the bowl and take your food out.

Be careful, because the tray is very hot after cooking. Always use the tray handle to remove it. If you want even crispier chips, you can cook them for a further 2 minutes after you’ve removed the tray.

13