Tekram Technology M205 manual Hardware Installation, Installing the Capture Card

HARDWARE INSTALLATION

nHardware Installation

Installing the Capture Card

Important: Handle circuit boards by the edges or bracket. Touch the bare metal of your computer case before handling any circuit boards to prevent static discharge damage.

1.Turn OFF all power to your system, including any peripherals (printer, external drives, modem, etc.).

2.Disconnect the power cord and the monitor cable from the back of the computer.

3.Remove the computer cover. Refer to your system user’s manual for instructions.

4.Align the gold-fingered edge on your card with an empty PCI expansion slot and gently insert it into place. You may need to remove the cover from the rear of the PCI expansion slot that you selected.

5.Replace the screws to secure the card retaining bracket in place.

6.Replace the computer cover.

Connectors and Jumpers on the M205 PRO Card

Refer to the diagram below while making the connections that follow.

External Connectors Internal Connectors and Jumpers

Page 8 M205 PRO User’s Manual