Tektronix TDS 500C, TDS 600B, TDS 700C To Change Vertical Scale and Position

Acquiring and Displaying Waveforms
TDS 500C, TDS 600B, & TDS 700C User Manual 3–15
Original Position Positioned Vertically Positioned Horizontally
Original Scale Scaled Horizontally
Record View
Channel Reference Icon
Scaled Vertically
Acquisition View
Figure 3–5: Scaling and Positioning
The TDS Oscilloscope permits you to change vertical scale and position quickly
from the front panel using dedicated control knobs. To change the vertical scale
and position:
1. Turn the vertical SCALE knob. Note only the scale of the selected wave-
form changes.
As you turn the vertical SCALE knob clockwise, the value decreases
resulting in higher resolution because you see a smaller part of the wave-
form. As you turn it counterclockwise, the scale increases allowing you to
see more of the waveform but with lower resolution.
2. Turn the vertical POSITION knob. Again, note that only the selected
waveform changes position.
To Change Vertical Scale
and Position