Configuration Commands
WFM 601A, WFM 601E & WFM 601M User Manual C–11
VECtor:GRATicule <LTNG | VECtor>
Selects either the Lightning or Vector display. Use the command
DISP:SINGLE:VEC (page C–25) to enable the vector display modes.
VECtor:GRATicule <LTNG | VECtor>
VECtor[:GRATicule]?
<LTNG | VECtor>
vec:grat ltng
vec:grat?
:VECTOR:GRATICULE LIGHTNING
SERial:MENU <STATUS | FORM | CABLE>
Sets the Serial Format display to the Status, Format, or Cable screens. The
STATUS screen includes information such as signal presence, line rate, and error
rate. The FORMAT screen displays the results of several data format checks. The
CABLE screen displays the calculated strength of the input signal and the cable
length.
The CABLE argument is valid only with firmware V2.X and later. With
firmware V1.X, the cable and signal strength readouts are available on the
STATUS screen.
SERial:MENU <STATUS | FORM | CABLE>
SERial[:MENU]?
<STATUS | FORM | CABLE>
menu serial
serial:menu form
ser:menu status
ser:menu?
:SERIAL:MENU STATUS
Syntax
Arguments
Examples
Returns
Syntax
Arguments
Examples
Returns