Cursor Commands
WFM 601A, WFM 601E & WFM 601M User Manual C–19
<TC | VC>:TRACK <ON | OFF>
Enables cursor tracking. When :TRACK is ON, moving one cursor moves the
other cursor an equal amount in the same direction. Table C–5 describes the
voltage and timing cursor tracking commands. Both options can be turned ON or
OFF.
Use the Voltage and Timing Cursor positioning commands (page C–18) to move
the cursors.
<TC | VC>:TRACK <ON | OFF>
<TC | VC>[:TRACK]?
<ON | OFF>
Table C–5: Voltage and Timing Cursor tracking commands and options
Commands Arguments Remarks
VC:TRACK <ON | OFF> When on, the Voltage cursors move together to maintain
the distance between them. Moving VC:ONE causes
VC:TWO to move the same amount.
TC:TRACK <ON | OFF> When on, the Timing cursors move together to maintain
the distance between them. Moving TC:ONE causes
TC:TWO to move the same amount.
vc:track on
tc:track off
tc:track?
:TCURSORS:TRACK OFF
Syntax
Arguments
Examples
Returns