WFM 601A, WFM 601E & WFM 601M User Manual xi
Preface
This manual describes the capabilities of the WFM 601A, WFM 601E, and
WFM 601M Serial Digital Component Waveform Monitors and their features
and specifications.
To get started, refer to the first section, Getting Started. This section shows you
how to install and configure the waveform monitor for use in your operating
environment. For detailed information about a feature, refer to the third section,
Reference.

About This Manual

This manual is composed of the following sections:
Getting Started provides a product description, installation instructions, and a
functional check procedure. Standard and optional accessories are also listed.
Operating Basics briefly describes the front panel controls and rear panel
connections.
Reference provides an alphabetized reference for all display modes and
configurable features of the waveform monitor.
Appendices provides additional information including the specifications,
remote control interfaces, and maintenance procedures.

Related Manuals

The following related document is also available.
The WFM 601A, WFM 601E, and WFM 601M Service Manual
(070–9836-XX) describes how to service the waveform monitors. This
optional manual may be ordered separately.
Complete and mail the Warranty Reply Card packaged with this manual to ensure
that you receive notifications of firmware or hardware upgrades.