Trace Oxygen Analyzer

Specific Model Information

The instrument for which this manual was supplied may incorporate one or more options not supplied in the standard instrument. Commonly available options are listed below, with check boxes. Any that are incorporated in the instrument for which this manual was supplied are indicated by a check mark in the box.

Instrument Serial Number: __________________________

The instrument with the above serial number has the following Options:

3020T-C

Three gas inputs, for sample, zero and span gases, with

 

three solenoid-actuated gas-flow control valves built in.

 

Valves are automatically synchronized to the analyzer's

 

electronic control sequences.

3020T–FBuilt-in flame arresters for Groups C and D service.

3020T–GBuilt-in flame arresters for Groups C and D service, plus

gas-control valves as in –C option, above.

3020T–HBuilt-in flame arresters for Group B (hydrogen) service.

3020T–I

Built-in flame arresters for Group B (hydrogen) service,

 

plus gas-control valves as in –C option, above.

19" Rack Mount

The 19" Relay Rack Mount units are available with either one or two series 3000 analyzer Control Units installed in a standard 19" panel and ready to mount in a standard rack. See Appendix for details.

Cell Class* ____________________ (L-2C standard).

Enter Class Designation

*See Part II, Chapter 2 and/or any addendum that may be attached to this manual for cell specifications.

Teledyne Analytical Instruments

iii

Page 3
Image 3
Teledyne operating instructions Trace Oxygen Analyzer, Iii, Specific Model Information, 3020T-I, Rack Mount