4 Operation

Model 3020T

 

 

 

 

 

 

 

 

 

Once a unique password is assigned and activated, the operator MUST enter the UNIQUE password to gain access to any of the set-up functions (except to enter the password). However, the instrument will continue to analyze sample gas and report on alarm conditions without entering the password.

Only one password can be defined.

After a password is assigned, the operator must log out to activate it. Until then, anyone can continue to operate the instrument without entering the new password.

To defeat the security after a unique password is activated, the password must be changed back to TETAI.

NOTE: If you use password security, it is advisable to keep a copy of the password in a separate, safe location.

4.4.1 Entering the Password

To install a new password or change a previously installed password,

you must key in and ENTER the old password first. If the default password is in effect, issuing the ENTER command will enter the default TETAI pass-

word for you.

Scroll to PWD, and ENTER to select the password function. Either the TETAI default password or AAAAA place-holder password for an existing password will appear on screen depending on whether or not a password has been previously installed.

T E T A I

Enter PWD

or

A A A A A

Enter PWD

The screen prompts you to enter the current password. If you are not using password protection, ENTER to accept TETAI as the default password. If a password has been previously installed, enter the password using EN- TER to scroll through the letters, and the DOWN/UP keys to change the letters to the proper password. The last ENTER enters the password.

If the password is accepted, the screen will indicate that the password restrictions have been removed and you have clearance to proceed.

PWD Restrictions

Removed

4-6

Teledyne Analytical Instruments

Page 42
Image 42
Teledyne 3020T operating instructions Only one password can be defined, Entering the Password