Teledyne 3300ZB Introduction

Trace Oxygen Analyzer Introduction

Teledyne Analytical Instruments 1

Introduction

The Teledyne Analytical Instruments (TAI) Model 3300ZB is a

microprocessor-based trace oxygen analyzer for real-time measurement

of trace amounts of oxygen in inert gases, or in a wide variety of gas

mixtures. It features simple operation, fast response, and a compact,

rugged construction.

The main features of the analyzer include:

 High resolution, accurate readings of oxygen content from 0-10

parts per million (ppm) through 0-1,000 ppm. Large, bright,

light-emitting-diode meter readout

 Simple pushbutton controls

 Advanced zirconium oxide measuring technology sensors

 Fast response and recovery time

 Microprocessor based electronics: 8-bit CMOS with on-board

RAM and 16 KB ROM

 Two user selectable ranges (depending on sensor configuration)

allow best match to user’s process and equipment

 Operator can select auto-ranging, allowing the analyzer to

automatically select the proper preset range for a given

measurement or lock the analyzer onto a single range

 Two concentration alarms with adjustable set-points

 Three analog outputs: two for measurement (0–10 VDC and

negative ground 4–20 mADC) and one for range identification

(0-10 VDC).