Trace Oxygen Analyzer | Operation | |
|
|
|
Operation
4.1 Introduction
Once the analyzer has been mounted, the gas lines connected, and the electrical connections made, the analyzer can be configured for your application. This involves setting the system parameters as follows:
∙Defining the
∙Setting alarm
∙Calibrating the instrument
All of these functions are performed via the front panel controls, shown in Figure
Analyzing a gas sample for the percent oxygen level through the cell block is the default mode of operation. The analyzer is monitoring the oxygen level as long as no front panel buttons have been pressed.
Figure 4-1: Front Panel Controls and Indicators
Teledyne Analytical Instruments | 15 |
