Teledyne 3300ZB Installation

Trace Oxygen Analyzer Installation

Teledyne Analytical Instruments 9

Installation

Installation of the analyzer includes:

1. Unpacking the system.

2. Mounting the control unit to a wall.

3. Making the electrical connections.

4. Making the gas connections.

5. Testing the installation.

CAUTION: READ THIS CHAPTER IN ITS ENTIRETY BEFORE

INSTALLING THE UNITS.

THE MODEL 3300ZB IS FOR INDOOR USE ONLY.

THE SAMPLE MUST BE FREE OF ENTRAINED

SOLIDS, WATER, OR COMBUSTIBLE COMPOUNDS.

As soon as you receive the instrument, carefully unpack and inspect

control unit, external probe, and any included accessories for damage.

Immediately report any damage to the shipping agent. The analyzer is

shipped with all materials needed to install and prepare the system for

operation.

Contents

Main OPERATING INSTRUCTIONS FOR Model 3300ZB Trace Oxygen Analyzer Model 3300ZB Teledyne Analytical Instruments ii Copyright 2014 Teledyne Instruments/ Analytical Instruments Safety Messages Page Table of Contents Page List of Figures DANGER COMBUSTIBLE GAS USAGE WARNING Page Page Introduction 1.1 Overview 1.2 Main Features of the Analyzer 1.3 Front Panel Description 1.4 Rear Panel Description Page Operational Theory 2.1 Introduction 2.2 Zirconium Oxide Sensors 2.3 Electronics Page Page Installation 3.1 Unpacking the Analyzer 3.2 Location and Mounting 3.3 Electrical Connections Page Page 3.4 Gas Connections 3.5 Installation Checklist Operation 4.1 Introduction 4.2 Using the Function and Data Entry Buttons 4.3 Setting the Analysis Ranges 4.4 Setting the Alarm Setpoints 4.5 Selecting a Fixed Range or Autoranging 4.6 Calibration 4.7 LED Display on StartUp Page Maintenance 5.1 Replacing the Fuse 5.2 Sensor Installation or Replacement Page Page Appendix A.1 Specifications A.2 Spare Parts List A.3 Drawing List