2.1.2 Mounting
The MX300-I can be mounted in several ways depending on the optional equipment ordered at the time of purchase. See Section 1.3.
2.1.2.1 V-MOUNT ADAPTER INSTALLATION
The V-Mount Adapter consists of a matching plastic plate with integral V-grooves that attach to the rear of the instrument.
To install V-Mount Adapter remove battery compartment door by prying up the hinged latch at the bottom of the cover, then slide the adapter plate into grooves provided in rear case. Replace the battery compartment door and secure door latch. See Figure 2-4.
Note: The door latch is a tight fit onto the battery cover. Use a coin to gently pry up the latch.
Figure 2-4: V-Mount Adapter Installation
2.1.2.2UNIVERSAL MOUNTING CLAMP INSTALLATION
The Universal Mounting Clamp is supplied with a 1/4-20 screw for securing the clamp to the rear of the instrument. A threaded brass insert is installed on the back of the instrument for this purpose. See Figure 2-5.
Figure 2-5: Brass Insert for Universal Mounting Clamp
Teledyne Analytical Instruments | 18 |
