f)Comms Menu Screen
The Comms Menu screen provides options for setting the serial communication’s baud rate, address and RS232/RS485 protocol.
Switch Functions:
Func | Go back to Main Menu screen |
◄ | Go to previous menu selection |
► | Go to next menu selection |
▲ | No function |
▼ | No function |
Zero | Go to screen associated with menu selection |
g)Serial Screen
The main configuration item on the serial screen allows you to select the baud rate of the THCD- 100 for serial communication. The allowed baud rates are 9600, 19200 & 57600. There is also an address field that is mainly used for identifying a particular unit if several are connected together on an RS485 network. All commands sent to the unit must be prefixed with the address letter (see section 5.2 for more information). Valid letters are ‘a’ to ‘h’. The other editable field is used to tell the
Switch Functions:
Func | Go back to Main Menu screen |
◄ | Select previous character when in edit mode |
► | Select next character when in edit mode |
▲ | Move edit field selection up |
▼ | Move edit field selection down |
Zero | Go to edit mode for currently selected field |
Page 15 of 28 |
