Teledyne THCD-100 instruction manual Service & Calibration, Cleaning, End of Life

6.SERVICE & CALIBRATION

6.1.Service

There are no user serviceable parts inside the instruments. Should any difficulties be encountered in the use of the THCD-100, it is recommended that you contact Hastings Instruments for advice and instructions.

6.2.Analog Inputs

There is no user calibration for the THCD-100. It is recommended that the instrument be returned to Hastings Instruments whenever such service is required.

There are no user adjustments in the instrument, indeed, the presence of lethal voltages within the instrument means that the user is strictly forbidden from removing the covers without invalidating Hastings Instrument’s obligations under warranty.

6.3.Cleaning

A dirty instrument may be wiped clean with a soft cloth that has been sprayed with a mild foaming cleaner then wiped dry immediately.

Under no circumstances should the instrument be wetted directly or left damp

6.4.End of Life

Hastings Instruments complies with the WEEE legislation and is registered as a manufacturer and importer of Electrical and Electronic Equipment. Once this equipment reaches its end of life, or is no longer required it may be returned to Hastings Instruments to be reused or recycled in accordance with the legislation. Please contact Hastings Instruments for full details. Terms and conditions apply.

165-072011 THCD-100 Power Supply Page 24 of 28