Industrial Modem MIU56 User Guide
Modem AT Commands
Your Industrial Modem has a number of specific commands that control and enhance its operation. To access and change these commands open a local terminal connection with your modem using your preferred communications software, such as WinFax Pro, and type the letters AT followed by the specific command and press <Enter>. The AT commands are case insensitive and may be entered in either lower or capital letters.
indicates the default settings
Commands |
|
Command | Description |
A | Answer call |
D | Dial number |
H | Hang up modem |
O | Enter |
Dial Modifiers |
|
Dial Digits |
,Pause while dialling
F or ^ | Disable calling tones |
JInitiate MNP 10 at 1200 bps (V.22)
KMNP 10 cellular power level adjustment for this call
LRedial last number
MInitiate MNP 10 at 4800 bps (V.32)
P | Pulse dial number |
R | Switch to answer mode |
S=n | Dial stored number ÔnÕ (where |
T | Tone dial number |
W | Wait for dial tone |
;Return to Local command state
!Hook flash
@Wait for quiet answer
MIU56Robert Way | Page 12 | 2/28/2003 |
