Telenetics MIU56 manual Registers, Ascii

Industrial Modem MIU56 User Guide

S Registers
Reg	Range	Def	Unit	Function
0	0-255	00	rings	Rings Before Answer
1	0-255	00	rings	Ring Count
2	1-255	43(+)	ASCII	Escape Sequence Character
3	0-127	13	ASCII	Carriage Return Character
4	0-127	10	ASCII	Line Feed Character
5	0-127	08	ASCII	Backspace Character
6	4-7	04	secs	Wait for Dial Tone
7	1-60	30	secs	Wait for Carrier
8	1-7	04	secs	Delay for Pause Modifier
9	1-255	06	0.1secs	Carrier Detect Response Time
10	1-255	18	0.1secs	Lost Carrier/Hang Up Delay
11	70-254	95	msecs	Touch Tone Timing
12	3-255	50	0.02secs	Escape Sequence Guard Time
16	0-8	00		Test in Progress (read only)
18	0-255	00	secs	Test Timer
25	0-255	05	0.01secs	DTR Loss Detection Time
26	0-255	00	0.01secs	RTS-CTS Delay
27	0-255	00	secs	Delay Before Security Dial-back
29	10-100	50	0.01secs	Hook Flash Duration (also sets S100)
30	0-255	00	10secs	Inactivity Timer (data mode)
33	0-255	03		EQM Threshold for V.32/V.32bis
38	0-255	00	secs	Disconnect Delay
42	0-255			Modem Disconnect Reason
43	0-255	15	msecs	Break Sequence Length
45	0-255	98		EQM Threshold - V.22/V.22bis/212A
47	1-255	08	secs	Auto-Range Time
62	0-255	75	0.01secs	V.42 detection timer
69	0-255	60	secs	Command line timeout
74	0-255			Modem Disconnect Reason (Previous Call)
80	1-19	15	5%	Flow Control High Water Mark
81	1-19	03	5%	Flow Control Low Water Mark
82	1-255	60		Failsafe Flow Control Overrun
95	0-63	0	bitmap	Extended Result Codes
96	1-255	80		Help Page Width
97	1-255	24		Help Page Length
100	1-10	5	100msecs	Hook Flash Duration (also sets S29)
105	0-255	30	secs	Voice-mode ÒDead-manÓ timer
110	0-255	4	rings	Voice-mode Rings before Answer
119	0-255	0	secs	Power Down Feature

Use AT? to see the Command Set supported by your modem's version of code.

MIU56Robert Way Page 20 2/28/2003