Industrial Modem MIU56 User Guide
\J0 | | Fallback to direct mode disabled |
\J1 |
| Fallback to direct mode enabled |
\Kn |
| Received Break control (default \K5) |
\N0 |
| Constant speed mode |
\N1 |
| Variable speed mode |
\N2 |
| MNP reliable mode |
\N3 | | V.42/MNP |
\N4 |
| V.42 reliable mode |
\N5 |
| V.42 |
\N6 |
| V.42/MNP reliable mode, fallback to MNP reliable mode |
\N7 |
| MNP |
\Q0 |
| Flow control disabled |
\Q1 |
| XON/XOFF flow control from modem and computer |
\Q2 |
| CTS flow control |
\Q3 |
| |
\Q4 |
| |
\Q5 |
| CTS flow control (CTS low until connection) |
\Q6 |
| |
\S |
| Display active configuration with detailed description |
\Tn |
| Set inactivity timer to n seconds (Default \T0) |
\V0 | | Disable reliable response codes |
\V1 |
| Enable reliable response codes |
\V8 |
| Extended response codes |
\V9 |
| Extended response codes with diagnostic information |
\X0 | | XON/XOFF pass through disabled |
\X1 |
| XON/XOFF pass through enabled |
*C0 | | Enable V.34 |
*C1 |
| Disable V.34 use V.FC |
*Wttt...tt |
| Specify welcome message text used by %W1(ttt...tt = text use for new line) |
Modulation Setting |
| |
+MS? |
| Report selected options |
+MS=? |
| Report list of supported options |
+MS= |
| <mod>,<automode>,<min_rate>,<max_rate><E> |
<mod> |
| see table |
<automode> | =0 (automode disabled, fixed modulation) | |
<automode> | =1 (automode enabled, auto select speed/mod) | |
<min_rate> | =lowest rate for modem connection | |
<max_rate> | =highest rate for modem connection | |
<mod> | Modulation | Possible Rates (bps) |
0 | V.21 | 300 |
1 | V.22 | 1200 |
2 | V.22bis | 2400 or 1200 |
3 | V.23 | 1200 |
9 | V.32 | 9600 or 4800 |
10 | V.32bis | 14400, 12000, 9600, 7200,or 4800 |
11 | V.34 | 33,600, 31,200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, |
|
| 9600, 7200, 4800, or 2400 |
64 | Bell 103 | 300 |
69 | Bell 212 | 1200 |
MIU56Robert Way | Page 17 | 2/28/2003 |
