Easy GPRS User Guide
80000ST10028 Rev. 0 - 02/01/07
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 24 of 35
Opening of FTP connection:
AT#FTPTO=1000<cr> (FTP settings of time-out)
OK
AT#FTPOPEN=”199.188.25.77”,”user”,”pass”,0<cr>
OK
In this case port of FTP server is not specified, which means that it has the default value: 21
AT#FTPTYPE=0<cr> (FTP settings of file type)
OK
FTP file transfer to the server in the file named “file.txt”:
AT#FTPPUT="file.txt"<cr>
CONNECT
(send the file)
+++ (escape sequence +++ to close the data connection)
NOCARRIER
AT#FTPCLOSE<cr> (closing FTP connection)
OK
Deactivation of GPRS context if required:
AT#GPRS=0<cr>
OK
2.2.4 FTP File download from the server
With the command AT#FTPGET=<filename> , to issued during an FTP connection, opens a data
connection and starts getting a file <filename> from the FTP server.
If the data connection succeeds, a CONNECT indication is sent, otherwise a NO CARRIER indication
is sent. The file is received on the serial port.
Parameter:
<filename> - file name, string type.
NOTE: The command causes an ERROR result code to be returned if no FTP connection has been
opened yet.