Contents
Main
Easy GPRS User Guide
Page
Contents
Page
Page
1.1.1 CSD application example
1.1.2 GPRS application example
1.2 Preliminary GPRS context parameters setting
1.2.1 Context parameter setting
AT+CGDCONT[=[<cid>[,<PDP_type>[,<APN>[,<PDP_addr>[,<d_comp>[,<h_comp>[,<pd 1>[,[,pdN]]]]]]]]]]<cr>
1.2.2 Minimum Quality of the Service Requested
AT+CGQMIN=<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean><cr>
Page
1.2.3 Requested Quality of the Service
AT+CGQREQ=<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean><cr>
Page
1.3 GPRS context activation and data state entering
ATD*99***<cid>#<cr>
Page
1.4 GPRS data state exit
send escape sequence:
+++
send command
ATH<cr>
Page
2.1.1 Easy GPRS Outgoing connection
2.1.1.1 Configuring the GPRS access
2.1.1.2 Configuring the embedded TCP/IP stack
2.1.1.3 Saving settings for the Internet peer to be contacted
2.1.1.4 Request the GPRS context to be activated
2.1.1.5 Open the connection with the internet host
2.1.1.6 Close the Socket without deactivating the context
2.1.2 Easy GPRS Incoming Connection
2.1.2.1 Defining the Internet Peer that can contact this device (firewall settings)
2.1.2.2 Request the socket connection to be opened in listen
2.1.2.3 Receiving connection requests
2.1.3 FTP Client
2.1.4 Email Client
2.1.5 Known limitations
2.2 FTP OPERATIONS
2.2.1 Opening and Closing an FTP Connection
2.2.2 Setting the FTP Transfer Type
2.2.3 FTP File transfer to the server
2.2.4 FTP File download from the server
Page
2.3 Examples1
2.3.1 Easy GPRS - HTTP client application
Page
2.3.2 Easy GPRS - EMAIL sending application
Page
2.3.3 Easy GPRS -EMAIL receiving application
Page
2.3.4 Remote connection between two modules
Page
3 List of acronyms
4 Document Change Log
