Easy GPRS User Guide
80000ST10028 Rev. 0 - 02/01/07
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 30 of 35
DATA<cr><lf>
354 Enter mail, end with "." on a line by itself
Return-Receipt-To: < module@domain.com ><cr><lf>
Reply-To: < module@domain.com ><cr><lf>
From: < module@domain.com ><cr><lf>
To: < receiver@server.net ><cr><lf>
Subject: Email test<cr><lf>
Date: Fri, 19 Sep 2003 11:41:32 +0200<cr><lf>
MIME-Version: 1.0<cr><lf>
X-Priority: 3 (Normal) <cr><lf>
X-MSMail-Priority: Normal<cr><lf>
X-Mailer: GM862 TELIT SW, Build 1.0.1000 (1.0.1111.0) <cr><lf>
Importance: Normal<cr><lf>
X-MimeOLE: Produced By GM862 TEST SW<cr><lf>
<cr><lf>
Content-Type: text/plain; <cr><lf>
charset="iso-8859-1"<cr><lf>
Content-Transfer-Encoding: 7bit<cr><lf>
<cr><lf>
This message is sent in order to test Easy GPRS feature. Hello World!<cr><lf>
<cr><lf>
. <cr><lf>
250 2.0.0 h8J9QNH3008461 Message accepted for delivery
QUIT<cr><lf>
221 2.0.0 smtp.domain.com closing connection
+++
NO CARRIER
The Telit module is now back in the command mode.
Let's suppose we want to receive with our embedded device an EMAIL by using a POP3 server.
Initial data:
Server to be contacted POP.mail.server
POP service port #110
Application Layer Protocol POP3 (RFC1785)
Receiver "module"<module@domain.com>