SpectraLink Corporation T1 Remote Module Installation
Link WTS – Link 3000 MCU
Network Clocked T1 Facilities If the T1 facilities are Network Clocked, one T1 Remote Module must be designated as
the Master Clock Source. Connect the Sync IN port on this T1 Remote Module to AUX
port A on the Intershelf Junction Panel. Note, this shelf must also be designated as the
Master Clock in the system configuration.
Connect T1 Facilities Connect the RJ48C jack from the CSU port at the local end to the DS1 A and DS1 B
ports on the T1 Remote Module. Port A controls slots 3-7 on the remote module at the
far end. Port B controls slots 8-12.
The following diagram shows the T1 Remote Module connections at the LOCAL site.
Part Number: 72-0059-06-E.doc Page 15