Texas Instruments 8200IC Model Identification and Differences, Identify Model, Model Differences

Introduction 3M™ Digital WallDisplay

Model Identification and Differences

Identify Model

The nameplate, located behind the storage door, identifies the 3M Digital WallDisplay (DWD). Push the storage door to open it. The figure below shows the nameplate, and the table shows the model numbers and correspon- ding model names.

Model Number

Model Number		Model Name
8000DP	3M	Digital WallDisplay 8000DP for Projection Display
8000VC	3M	Digital WallDisplay 8000VC for Video Teleconferencing
8100CB	3M	Digital WallDisplay 8100CB with Copyboard Display
8200IC	3M	Digital WallDisplay 8200IC with Interactive Collaboration
8200IW	3M	Digital WallDisplay 8200IW with Interactive Whiteboard

Model Differences

Below is a table that identifies the differences between the 3M Digital WallDisplay models.

Do not use markers, dry-erase or otherwise, on the 3M Digital WallDisplay

CAUTION for Video Teleconferencing screen. Marks cannot be removed from the 3M Vikuiti High Brightness projection screen.

Model Number	Projection Screen	Copyboard*	Interactive Whiteboard**
8000DP	Easy Dry-Erase and	NO	NO
	Projection
8000VC	3M Vikuiti High Brightness	NO	NO
	for projection only
8100CB	Easy Dry-Erase and	YES	NO
	Projection
8200IW	Easy Dry-Erase and	NO	YES
	Projection
8200IC	Standard Projection	YES	YES
	and Dry-Erase

*The Copyboard feature allows you to print notes written on the 3M Digital WallDisplay to an attached printer. (PCL3 compatible printer required. See list in Appendix.)

**The Digital Whiteboard feature allows you to capture notes written on the 3M Digital WallDisplay with an attached computer or use the 3M Digital WallDisplay as an interactive display for a computer.

10 © 3M 2003. All Rights Reserved.