26
Menu System 3M™ Digital WallDisplay
©3M 2003. All Rights Reserved.
Input Select Menu
The Input Select menu defines the displayed video source. When Input Select menu is selected, the current
video source is shown. The Input options are: Computer (VGAInput), DVI-D, S-Video, Comp. Video (RCA
Video Input), and No Signal. An Input option is available to select when an active video source is connected to
the 3M Digital WallDisplay input connection.
To set the Input Select menu:
1. Open the menu system by pressing the remote control Menu button or any arrow on the Menu Keypad.
2. Select the Input Select menu function by pressing the up or down arrows on the remote control Disk Pad
or Menu Keypad.
3. Press the right arrow of the Disk Pad or Menu Keypad repeatedly until the desired input option is shown.
4. Activate the input option by pressing the left arrow of the Disk Pad or Menu Keypad.
5. Close the menu system by pressing the Menu button or scrolling to Exitand selecting it with the right
arrow of the Menu Keypad.
Reset All Menu
The Reset All menu function sets all menu settings to their default settings.
To turn the Reset All menu function on:
1. Open the menu system by pressing the remote control Menu button or any arrow on the Menu Keypad.
2. Select the Reset All menu function by pressing the up or down arrows on the remote control Disk Pador
Menu Keypad.
3. To activate the Reset Allfunction, press the right arrow of the Disk Pad or Menu Keypad.
4. Close the menu system by pressing the Menu button or scrolling to Exitand selecting it with the right
arrow of the Menu Keypad.