![](/images/new-backgrounds/1129873/12987343x1.webp)
Digital Markers and Eraser | 3M™ Digital WallDisplay |
Assembling Digital Eraser
The digital eraser erases marker input by sending signals from the digital eraser in the same way as the digital markers. The eraser sends an “erase” signal when you press the felt eraser against the 3M Digital WallDisplay screen.
Remove the battery cover on the top of the digital eraser by twisting a coin counterclockwise in the slot. Insert two coin batteries (CR2032), with the positive (+) side up. Screw the cover back on.
These batteries contain lithium. Consult your local hazardous CAUTION waste regulations and dispose of these batteries in the proper
manner.
22 | © 3 M 2003. All Rights Reserved. |