Detailed Description of the EVM, Topic | Texas Instruments SLEU056

Chapter 2

Detailed Description of the EVM

This chapter describes the TAS5010−5112F2EVM board in regards to board layout, jumpers, switches, buttons, and connectors.

Topic		Page

2.1	Board Overview	. . 2-2
2.2	Description of Jumper Settings	. . 2-3
2.3	Default Jumper Positioins	. . 2-4
2.4	Description of Connectors	. . 2-4
2.5	Description of Switches and Buttons	. . 2-7
2.6	Description of Indicators	. . 2-8

Detailed Description of the EVM

2-1

Image 13

Contents

User’s Guide Products Applications Important Notice EVM Important Notice EVM Warnings and Restrictions About This Manual Read This First Part Number Literature Number Related Documentation From Texas Instruments Contents Tables Figures Introduction TAS5010−5112F2EVM FeaturesTopic −1. Simplified TAS5010−5112F2EVM Block Diagram TAS5010−5112F2EVM Features TAS5010−5112F2EVM Features Page Topic Detailed Description of the EVM Mute Board Overview Enable/Disable S/PDIF−MUTE JMP130 Description of Jumper SettingsDouble-Speed Control JMP120 Description of Connectors Default Jumper Positioins1 S/PDIF Digital Audio Coaxial/RCA Input J100 2 S/PDIF Optical J101 Analog Output Connector J170 Pin No Description Analog Input Connector J160Pin No Pin Description Net Name on Schematic PC and I2C Interface J300 Power Supply Connector Loudspeaker Connectors J540, J541, J580, and J581Pin No Description Net Name at Schematic Reference Designator Description Description of Switches and Buttons Power LED LED223 Description of IndicatorsTemperature Warning LED LED221 Protection Mode LED LED220 EVM Board Operation Power the EVM by One Power Supply Power SupplyPower the EVM With Two Power Supplies Load = 6 Ω Equalizer Enable Setup the TAS5010−5112F2EVM With the S/PDIF Input Interfacing the Analog Line Output Setup the TAS5010−5112F2EVM With the Analog Line InputControlling the DAP With PC Software Start-up Sequence Hints for Measurement of Performance